“I was tired of putting the space off, and I didn’t want to stick with what I kept seeing on Pinterest,” Porcher says. “I felt the space could use a spot of color, and I love colors in the coral family. Canyon Ridge just spoke to my soul. This color brings new life to my eat-in space. I love the energy it brings.” You can find tons of DIY-friendly woodworking plans on her website, but here is a quick look at her instructions on how to build this window seat.
How to Build a Window Seat
Supplies Needed
5 8-foot 1x3 boards3 4x8-foot sheets of plywood2½" Pocket hole screwsPocket hole jigCordless drillClampsWood glue1¼" Finish nails or screwsPaint (Better Homes & Gardens Interior Paint in the shade Canyon Ridge, available at Walmart)Paint rollerPaint trayPaintbrushPainter’s tapeLevelPaper towels
Step-by-Step Directions
You’ll need basic woodworking tools and materials to create this window seat. Be sure to wear all necessary safety gear when cutting the boards.
Step 1: Make Cuts
Every space is unique, so you should carefully measure the area where you want to build a window seat. Timisha recommends making the large center box first and then the corner pieces to fill in.
Step 2: Build Center Box
Drill pocket holes for screws on the side panels. Attach side panels to center panels with pocket hole screws. Secure bottom panel to all sides with pocket hole screws. Add a divider to the center of the box for stability. Secure with pocket hole screws. Buy It: Better Homes & Gardens Interior Paint, in Canyon Ridge ($32, Walmart)
Step 3: Build Frame for Center Box
Use 1x3 boards to build a frame for the center box. Drill pocket holes in horizontal pieces and secure them to the vertical pieces of the frame as illustrated. Attach the frame to center box with wood glue and finish nails.
Step 4: Add Lid to Center Box
Add a trim piece to the top of the box that runs along the back of the box. Add a piano hinge to the trim piece and attach the other part of the hinge to the lid for the box.
Step 5: Build Corner Boxes
Create a triangle with plywood that will fit against the center box and the wall. Add a base and secure it to all three walls with pocket hole screws. Remember the dimensions in your home will likely differ from the example shown.
Step 6: Build a Frame and Lid for Corners
Use 1x3 boards to build a frame for the front side of the corner boxes. Secure front rails to stiles with pocket hole screws. Cut a lid to fit the top of the triangle boxes. Use finish nails to secure thin strips of wood to the bottom of the lid. These strips will prevent the lid from slipping off.
Step 7: Sand Window Boxes
Before securing the boxes in place, take time to sand them thoroughly. It will be easier to sand on a work surface than when they are in place in your home.
Step 8: Install Window Seat Boxes
Dry fit the center box and side boxes so they fit snuggly together. If you want to make this a permanent feature in your home, secure the boxes to your wall. If this will be a freestanding unit, use clamps to hold the boxes together and secure them with wood glue and screws. Or leave them as three separate pieces.
Step 9: Prime and Paint Window Box Seat
Apply a primer to all exterior areas of the window seat. Allow to dry. Paint window seat. Allow to dry and apply a second coat. Let dry. Top with cushions or throw pillows to soften the sitting area.
